OVERVIEW
Two-component liquid silicone rubber for textile screen printing. Easy to get thickness and sharp effect on garment, shoes, elastic tapes. It can be applied on automatic screen printing production mixed with 2% catalyst.
We have different mixing system of silicone base and catalyst, like 100:2, 10:1 or 1:1, but each system can work perfectly. We always waiting for your request !
TYPICAL PROPERTY
Code NO. |
T-J05 |
Color |
Transparent |
Durometer - Shore A |
33 Shore A |
Dynamic Viscosity |
300000 Centipoise |
Elongation |
462 % |
Pot Life |
72 hours |
Shelf Life |
360 Days |
Solids Content |
> 98 % |
Specific Gravity @ 25C |
0.95 |
Tear Strength |
4.3Mpa |
Tensile Strength |
1015.3 psi |
PACKING
5kg/barrel; 20kg/barrel
CLEANING
After printing, silicone can be cleaned away from equipment with hydrocarbon based solvent.
PRODUCT DISPLAY
FAQ
1.What is your MOQ?
It depends on customer's exact request.
2.Are you manufactuer or trading company?
We are silicone ink and silicone heat transfer labels manufacturer, but we also do some trading according to customers trust.
3.Where is your main market?
Our main market based in Asian and south America countries where there are more printing factory for garments or shoes.
4.What is your lead time?
Normally in 3~15 days according to order quantity.
5.What is your payment payment ?
T/T, Western Union, PayPal
AFTER SALES
1. All silicone base is mixed with 2-5% catalyst, too few or too much would affect the curing of silicone.
2. Our silicone base can be mixed in proper rate to improve related functions.
3. Our silicone is workable for both machine and table production which would not block mesh.
4. Heating temperature of our silicone heat transfer stickers is 155~170℃, 15~20 seconds according to different fabrics and thickness.
5. The order we delivered if its not match your request, pls keep it sealed well for replacement.
How to make silicone high density glossy effect ?
1.mix High density silicone T-J05 (for cotton fabrics) or base-coating silicone T-J04(for polyester or swimwear smooth fabrics) then print under-coating 2 layers
2.mix round silicone T-J02 or high density silicone T-J05 (for HD print) with color
pigments, print color mixture to the thickness requested.
3.if you need round glossy effect, mix clear glossy silicone T-J03 or T-J031 and print on top 2 layers.
Remark:
1. All clear silicone has to be mixed with catalyst 2-5%, the more catalyst you add, the faster it would cure. Usually it can stay for 7 days working under room temperature, so its good for machine and table printing as well.
2. All clear base in same series can be mixed together
3. The heating temperature is around 100-120 degree. After mixing, it can be kept under room temperature for 150-168 hours. No mesh block.
Any confusion, pls feel free to contact with me.
http://www.siliconeheattransfer.com/